Industrial Ethernet Media Converter Fast Ethernet 1 x 10/100Base-TX to 1 x 100Base-FX (SFP) Un-managed FCNID-1EN-1ES(VER0)

General Description

The FCNID-1EN-1ES is a Fast Ethernet media converter that meets the industrial-grade requirement and converts the 10/100Base-TX Ethernet signal to the 100Base-FX fiber signal and vice versa. It comes with an RJ45 port for the Ethernet connection and an SFP slot for the fiber connection. It can convert and extend the transmission distance of 100m of a typical Ethernet network to that of the 155Mbps SFP transceiver selected. The FCNID-1EN-1ES industrial Fast Ethernet media converter can operate in a broad temperature range from -40 degrees Celsius to 85 degrees Celsius. This makes it suitable to be deployed in a harsh industrial environment. It also complies fully with the industry IEEE802.1Q standard for virtual local-area networks (VLANs) which requires longer data packets to be sent on the network.

Features

· Auto MDI/MDI-X function
· Half/Full duplex auto-negotiation
· Support link-fault-pass-through function to monitor broken links
· Support store-and-forward /cut-through working mode
· Support jumbo frame rate of 9kbytes
· Come with a resettable fuse to prevent current overload
· Come with IP-40 rating protection
· Wide redundant power design range from 12 to 56VDC
· Provide protection against power polarity reverse
· Provide protection against electrical fast transient
· Provide protection against electrostatic discharge (ESD) 

Application Diagram 

Standard Compliances 

EMC: CE 
EMI: FCC Part 15 CLASS A 
EMS: IEC 61000-4-2 Level 4 (8K/15K)
         IEC 61000-4-3 Level 3 (10V/m)
         IEC 61000-4-4 Level 3 (1V/2V)
         IEC 61000-4-5 Level 3 (4KV/2KV)
         IEC 61000-4-6 Level 3 (10V/m)
         IEC 61000-4-8 Level 4 (30A/m)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32 0.5m
Vibration: IEC 60068-2-6
Railway Traffic: EN50121-4

Specifications

Standards Comply

• Standards 
  

  IEEE802.3 10BaseT
  IEEE802.3u 100BaseT(X)
  IEEE802.3x Flow control and back pressure
  IEEE802.1d Spanning Tree
  

Interface

• Copper Port
  Data Rate: 10/100M
  Connector: RJ45
  
  
• F/O Port
  Data Rate: 155M
  Connector: SFP slot 

Performance 

• Processing Type: Store and Forward, Cut-through
  
• Back Bandwidth: 0.4Gbps
• MAC Address Size: 2Kbit
• Packet Buffer Size: 1Mbit
• Time Delay: <10us
• Frame: 9Kbytes

LED Indicators 

• Indicators 
  PWR1: ON=Power Connected
  PWR2: ON= Power Connected
  FL/A: ON=Fiber Connected; Active=Data Transmitting
  TL/A:ON=Copper Connected; Active= Data Transmitting
  100M: ON=100M Data Rate Transmitting 

Dip-switch

• Dip1 ON + Dip2 ON = Modified Cut-through Mode
• Dip1 ON + Dip2 Off = Converter Mode
• Dip1 Off + Dip2 ON = Cut-through
• Dip1 Off + Dip2 off = Store and forward mode
• Dip4 ON = LFP Enable
• Dip4 Off= LFP Disable
  
  

Operating and Environmental 

• Operating Temperature 
  -40°C ~ 85°C
  
• Storage Temperature
  -40°C ~ 95°C
  
• Humidity
  5% ~ 95%, non-condensing  
  

Dimension and Weight 

• Dimension (mm)
  115*81*35mm ( HXDxW)

• Weight 
  0.3kg (weight for the device without packaging)
  
  

Housing

• Material
  Aluminium Alloy IP40 Rated
  

 
Power Requirement

• Input Voltage: 12~56 VDC, redundant power inputs
  
• Power Consumption: ≤5W
• Protection: Overload Current; Reverse Polarity 
• Connector: Terminal Block 
  
  

Installation

• can be DIN-Rail mounted